Flail Mower X Series 2.8m


excluding VAT


This Kellfri flail mower is part of the X series range, a robust flail mower with sturdy chassis and SKF ball bearings for 90-100 hp tractors.

The X series are built to face tougher and rougher terrain and are designed to cope with the demanding work they are exposed to. Practical for flailing, topping or cutting medium-sized or large grasslands and grassed areas.

The flail mower is equipped with;

  • Working width 2.8m
  • Sturdy chassis
  • SKF ball bearings
  • Openable flap
  • Hydraulic side shift adjustment
  • Adjustable support roller and chain guards
  • Adjustable cutting height (0-70mm)

The fast rotation speed ensures that the forged hammer flails can easily hack and cut all types of material, giving you a dependable machine that is efficient for large material flows. The flail mower is fitted with 22 hammer flails as standard. The flail mower is also adapted for Y-flails.

The coarse-toothed welded counter bar in the chassis breaks up grass effectively, and the detachable counter blades keep the grass in the machine and enables more material to be cut.

The cutting height is adjusted by the support roller and skids. The adjustable support roller guarantees a correct cutting height on uneven ground. The cutting height can be adjusted enabling you to cut the grass close to the ground and achieve a more level result. The grass is evened out and the remnants moulder away faster. The support roller has a scraping iron to keep the roller free from cut material. The support roller is built into the chassis to cope with tough terrain, and is protected in the event of collision with obstacles.

The front of the flail mower is fitted with chain guards that adapt to the substrate and protect both the tractor and the surroundings from stone chipping and grass spray.

This flail mower is equipped with hydraulic side shift adjustment, which enables you to shift the machine to the left or right. The side shift adjustment means that you can cut at the side of your tractor and thereby reach areas that would otherwise be difficult to reach. The hydraulic side shift adjustment enables you to drive with just one pair of wheels in the uncut area and cut closer to ditches, fences, etc.

The mower has an openable flap. You open the flap when you know you are cutting or topping ground that generates a higher flow of material. This enables you to drive freely under the same conditions as with a closed flap and a normal flow of material. You save on fuel and reduce wear on the belts, and you can also operate at a higher speed, as the grass does not become twisted around the roller. The grass is also spread more evenly.

The flail mower’s chassis is made of 6 mm thick steel, and the side plate is 10 mm thick.

The flail mower is supplied with a PTO drive shaft, transmission oil, hydraulic cylinder and hydraulic hoses (two hydraulic ½ inch, quick coupling male hoses) as standard.

The mower requires one double-acting hydraulic outlet on the tractor.

Length 3010mm     Width 1290mm     Height 935mm     Weight 862kg


Belts – 5 x B60 Li1524

Crane reach – Med slagor 420 mm

Rotor Speed at 540rpm – 1993,5 rpm

Rotor roller – 168 mm ø, thickness 10 mm

Three-point linkage – Cat 2

PTO Speed – 540 rpm